Attenuates the microphone input to allow for the recording of loud sounds without clipping.
Reduces low frequency and infrasonic rumble from HVAC systems indoors or street traffic outdoors from over-powering the recording.
Restores some of the high frequency content that is often lost when a blimp or furry windshield is placed over the microphone and improves the intelligibility of recorded speech.
- Rechargeable Built-in Li-ion Battery
The built-in battery supports at least 150 hours operation.
Prevents radio frequency interference for clean sound
- Gold-Plated XLR Connector
Resists corrosion and ensures excellent signal transfer
If you would like to check the battery level during recording, double press the Power button, the 4 indicators will show the remaining battery capacity. If 4 indicators are all blue, the battery is full.
- Supplied with foam windshield, mic clip and shock mount, XLR Cable and MicroUSB charging cable
| Directional Pattern
| Frequency Range
||75 to 20k Hz (selectable HPF 150 Hz)
||-38 ± 3dB(OdB=1 V/Pa,at 1 kH 1.5V 2.2K)
| Output Impedance
| Dynamic Range
||125 dB (per IEC651)
| Maximum SPL
|| f=1KHzTHD, 1% 105 dB
| Signal to Noise Ratio
||80 dB SPL(per IEC651)
| high pass filter button
| high frequency boost
|| +6 dB
|| -10 dB
| Output Connection
|| 3-pin XLR, balanced output between Pin 2 (+),
Pin 3 (-) and Pin 1 (ground)
|| 48V phantom power
built-in lithium battery (battery life:150 hours)
|| 2.2 x 2.2 x 28.2 cm
|| 240.Sg (8.48oz)
- Sound Bird T3 microphone
- XLR output cable
- Micro USS cable for charging
- Foam windshield
- Mic Clip SR-SMC1
- Boompole/Mic Stand Shock Mount SR-SMC3
- A waterproof microphone carry case