Receiver | 3.5 mm / USB-C / Lightning | ||
Transmitter | with 2 Mics | ||
Color | Black |
Dimensions | 45 × 31.6 × 13 mm | ||
Weight | 23 g | ||
Sample Rate / Bit Depth | 48 kHz / 24-bit | ||
Signal-to-noise Ratio | >80 dB | ||
SPL | 120 dB | ||
Output Mode | Mono / Stereo / Safety Track | ||
One-click Noise Cancellation | ✔ | ||
Noise Cancellation Mode | Light / Strong | ||
Frequency Response | 20 Hz - 20 kHz | ||
Latency | 25 ms | ||
Low Cut | 75 Hz / 150 Hz | ||
Transmission Range | 150 m | ||
Built-in Mic | 6 mm Condenser Mic | ||
Battery Life | 20 hours | ||
Clip | Metal / Non-removable / Non-rotatable | ||
Windproof Capsule | ✔ | ||
Power Supply | Built-in Lithium-ion Battery / External Power Supply |
Display | OLED | ||
Real-time Monitoring | ✔ | ||
Playback without Unplugging Receiver | ✔ | ||
Charging while Recording | ✔ | ||
Supports Dual Device Output | ✔ | ||
Terminal Interaction | Replaceable / Plug and Play / No Latch | ||
3.5 mm | Female Connector | ||
USB-C | ✔ | ||
Lightning | ✔ |
Dimensions | 118.5 × 56.2 mm | ||
Weight | 140 g | ||
Charging Cycles (2 × TX + 1 × RX) | Appox. 1 Cycle | ||
Operating Time (2 × TX + 1 × RX) | 40 hours | ||
Battery Capacity | 1250 mAh |
Currently it can be used with cameras (3.5mm TRS), smartphones (supports USB-C, Lightning, 3.5mm TRRS), computers, tablets and other devices.
Yes, it can be used seamlessly and supports providing audio to the iPhone through the receiver.
Blink500 B2+ can provide three channel modes: Mono, Stereo and Security Track.
S: Stereo mode, where the audio recorded by the two transmitters is recorded to separate channels on the output.
M: Mono mode, where the two transmitters are combined into a single output.
M : Safe Track function. Safe Channel mode will record the second channel of audio at -6 dB as a backup to prevent the source from becoming unexpectedly loud and thus distorting the main channel reception.
*Separation of safety tracks is required in post-production.
1. Short press the power button can quickly select the TX/RX volume value, at this time short press the M button to adjust the volume size
2. You can quickly adjust the TX/RX volume value through APP.
1.Do not speak too close to the microphone when using the microphone to speak, the airflow is easy to cause the audio overexposure
2.Speaking louder, you can clip the microphone down a little bit.
3.Speaking lower, you can clip the microphone closer to your mouth.
4.Adjust the TX or RX gain value.
Blink500 B2+' receiver only supports connecting 1 or 2 transmitters
1, The battery life of Blink500 B2+ receiver is about 16 hours.
2, The full battery life of the transmitter is about 20H.