Air SE comes in ridiculously small and impossibly light. Weighing just 5g and no larger than your thumb, it stays truly inconspicuous when clipped on.
Dock it on the charging bar, power it on, and it turns into a handheld mic right away. Interviews feel more present and powerful, and the bar offering a steady, comfy grip. Two configs in one mic, ready wherever you are.
The charging bar is a masterpiece of modular design: clean, industrial aesthetics with flawless magnetic fit. About the size of a lighter, it magnetically holds two mics and a receiver, so everything you need fits in a pocket. Each module snaps in and out with precision-engineered tolerances and smooth force — incredibly satisfying.
Saramonic’s first true AI chip powers the Air SE with exceptional noise cancellation performance, eliminating up to 40 dB of background noise. Unlike traditional ENC that only handles steady ambient sounds, Air SE’s AI algorithm, trained on over 700,000 noise samples across 20,000+ hours, identifies and separates voices from complex or sudden noise in real time, then removes it accurately and adaptively.
Choose light or strong mode to easily filter out street traffic, wind, sudden dog barks, and more, leaving only clear, natural vocals.
Air SE captures 48kHz/24-bit high-resolution audio with an 80 dB signal-to-noise ratio and 120 dB max SPL, which means you get rich, layered detail and an ultra-low noise floor. From whispers to shouts, every sound is captured with pristine clarity, recreating the moment as if you were there.
.webp)
| TX Weight | 5g | ||
| Built-in Capsule | Condenser | ||
| Frequency Response | 20 Hz - 20 kHz | ||
| Sample Rate / Bit Depth | 48 kHz 24-bit | ||
| SNR | > 80 dB | ||
| Max SPL | > 120 dB | ||
| Transmission Range | 200 m | ||
| Latency | < 25 ms | ||
| AI Noise Cacellation | 2-Level | ||
| Mute | ✓ | ||
| EQ | Vocal Boost / High Boost / Bass Boost | ||
| Low Cut | 75 Hz / 150 Hz | ||
| Limiter | ✓ | ||
| Sound Mode | Mono / Stereo | ||
| Safety Track | ✓ | ||
| Output Gain Adjustment | ✓ | ||
| Camera Trigger | ✓ | ||
| Pass-through Charging | × | ||
| Battery Life | 6 hours | ||
| Charging Time | 1.5 hours |
Saramonic Air SE supports three output modes: Mono, Stereo, and Safety Track.
M (Mono): Audio from two transmitters is combined into a single output track.
S (Stereo): Audio from two transmitters is recorded to separate output channels.
Ms (Safety Track): A secondary audio track is recorded at -12 dB as a backup to prevent distortion from unexpected loud sounds.
* Post-production separation is required to use the safety track.
* Safety Track can only be enabled in Mono mode.
* Stereo recording requires the connected device to support stereo input.
AI noise cancellation is much better at removing non-steady background noises like keyboard typing or running water, while keeping voices natural and clear. Traditional ENC mainly targets low-frequency and steady noise such as wind or air conditioners and can slightly affect vocal clarity.
On the Air SE, noise cancellation levels can be adjusted directly on the receiver.
Yes. However, the transmitter cannot charge with the windscreen attached.
Air SE supports up to 2 transmitters connected to 1 receiver simultaneously.
